Vulnerability discovery and research by Jared Rittle and Carl Hurd of Cisco Talos.
Introduction
TP-Link recently patched three vulnerabilities in their TL-R600VPN gigabit broadband VPN router, firmware version 1.3.0. Cisco Talos publicly disclosed these issues after working with TP-Link to ensure that a patch was available. Now that a fix is out there, we want to take the time to dive into the inner workings of these vulnerabilities and show the approach we took with our proof-of-concept code.
Background
The TP-Link TL-R600VPN is a five-port small office/home office (SOHO) router. This device contains a Realtek RTL8198 integrated system on a chip. This particular chip uses an offshoot of the MIPS-1 architecture developed by Lexra. Except for a few proprietary instructions for handling unaligned load and store operations, these two instruction sets are essentially the same. The instructions that are not included in Lexra are LWL, SWL, LWR, and SWR. These proprietary instructions are often used when compiling a program for the more common MIPS-1 architecture and cause a segfault when encountered in Lexra. The knowledge of this key difference is imperative to assembling working code for the target.
For more information about Lexra MIPS and its differences with the MIPS-1 architecture, refer to ‘The Lexra Story‘ and the MIPS-1 patent filing.
Read more here
CONNECT WITH CISCO
LET US HELP
Call us: 1.800.553.6387 - Ext 118
US/Can | 5am-5pm Pacific Other Countries